Boat Mate Regular Priced From - $449.99Sale Priced From - $399.00 A $50.99 Savings!
Part number: BOFEN-120X12
Boat Mate Mooring & Between Boat Fender - 120 x 12 inches
Description
Boat Mate Mooring & Between Boat Fender
Introducing the BOAT MATEā¢. No more worries about nicks, scratches, and extensive damage from a storm or excessive waves. Your BOAT MATEā¢ will provide the safety and confidence to dock your boat with ease. Protect your investment with the 10 foot long BOAT MATEā¢ inflatable fender. The 12ā diameter allows for maximum cushioning of your boat especially in rough water with ease of quick docking. Our 10ā length is perfect whether you have a pontoon, surf, ski, or fishing boat. It attaches easily to your dock with any of the 6 Stainless D-Rings which are mounted in ideal positions for various mooring options. Many developments are replacing non-conforming docks with newer and compliant designs. Our perfectly sized BOAT MATEā¢ fits into even the smallest boat slips!
The BOAT MATEā¢ is every boater's protective layer when docked (and docking). No more worries about nicks, scratches, and extensive damage from a storm or excessive waves. It comes with four stainless steel upper rings and two end rings allowing for several mooring options. Our 10 ft x 1 ft diameter is the perfect universal length for all boats such as surf, ski, fishing, and pontoon.
Flexibility - 6 large stainless steel D-Rings, (4 upper rings, plus two end rings allow for several mooring options.
Easy to Inflate - Highest quality quick release air valve with a cover to eliminate any air or water issues.
Dock Guard - The "dock guard" strip adds even more protection between your BOAT MATEā¢ and the dock preventing excessive wear and tear from rubbing with normal back and forth movements from any waves.
Quality - Built with quality in mind, the construction is a double woven PVC rated one of the thickest and strongest materials on the market. All seams are heat sealed, providing an air tight chamber for a long life of durability on your dock.
Included - The included universal hand pump with gauge makes it easy to inflate in 2 minutes. (which you likely already use for your inflatables (paddle board, dinghy, etc.)
No Step - Your new BOAT MATEā¢ also comes with 2 āNO STEPā logos to remind your guests to avoid stepping onto the product, preventing slips and falls, keeping your safety in mind.
Can I leave my BOAT MATEĀ® in the water all boating season?
Absolutely! Attach it to the dock and simply remove it at the end of the season. A helpful tip to extend its life is to give it a wipe down when needed throughout the season.
How much do I inflate the Boat MateĀ®?
We recommend inflating your Boat MateĀ® between 1-2 psi. You will want to allow some room for expansion for when temperatures rise, (you should be able to depress the BOAT MATEĀ® approximately 1/2 inch with your thumb.) If you use the pump supplied, 100 manual pumps should inflate the Boat MateĀ® perfectly.
What size of boats can be used with the BOAT MATEĀ®?
The Boat MateĀ® will protect watercraft up to 24' long with a single bumper. For larger applications, use 2 BOAT MATESĀ® connected end to end with the stainless steel D rings.
How do I clean the bumper?
Lukewarm water and a mild detergent is all you need with a soft cloth.
What happens if I get a hole in my BOAT MATEĀ®?
Each BOAT MATEĀ® comes with a repair patch if it happens to accidentally tear.
Is the BOAT MATEĀ® safe to step on?
BOAT MATEĀ® is not intended to use as a step and we've indicated that by putting a "No Step" symbol on each end for everyone's safety.
Can BOAT MATEĀ® be used in salt water?
Yes, however we recommend cleaning monthly to protect it from any harsh elements.
Does the BOAT MATEĀ® have a cover?
No, we have found that a cover or āsockā actually accumulates dirt and debris and can end up scratching your boat.
Is there a specific way to moor or tie up the BOAT MATEĀ®?
For best results, and to prevent stress on the D-Ring patches, the Boat MateĀ® ropes must be perpendicular to the boat mate and dock. Do not attach any ropes at less than a 90 degree angle. (Anything less will put an unnecessary strain on the D-Ring connection and possible cause detachment).
Introducing the BOAT MATEā¢. No more worries about nicks, scratches, and extensive damage from a storm or excessive waves. Your BOAT MATEā¢ will provide the safety and confidence to dock your boat with ease. Protect your investment with the 10 foot long BOAT MATEā¢ inflatable fender. The 12ā diameter allows for maximum cushioning of your boat especially in rough water with ease of quick docking. Our 10ā length is perfect whether you have a pontoon, surf, ski, or fishing boat. It attaches easily to your dock with any of the 6 Stainless D-Rings which are mounted in ideal positions for various mooring options. Many developments are replacing non-conforming docks with newer and compliant designs. Our perfectly sized BOAT MATEā¢ fits into even the smallest boat slips!
The BOAT MATEā¢ is every boater's protective layer when docked (and docking). No more worries about nicks, scratches, and extensive damage from a storm or excessive waves. It comes with four stainless steel upper rings and two end rings allowing for several mooring options. Our 10 ft x 1 ft diameter is the perfect universal length for all boats such as surf, ski, fishing, and pontoon.
Flexibility - 6 large stainless steel D-Rings, (4 upper rings, plus two end rings allow for several mooring options.
Easy to Inflate - Highest quality quick release air valve with a cover to eliminate any air or water issues.
Dock Guard - The "dock guard" strip adds even more protection between your BOAT MATEā¢ and the dock preventing excessive wear and tear from rubbing with normal back and forth movements from any waves.
Quality - Built with quality in mind, the construction is a double woven PVC rated one of the thickest and strongest materials on the market. All seams are heat sealed, providing an air tight chamber for a long life of durability on your dock.
Included - The included universal hand pump with gauge makes it easy to inflate in 2 minutes. (which you likely already use for your inflatables (paddle board, dinghy, etc.)
No Step - Your new BOAT MATEā¢ also comes with 2 āNO STEPā logos to remind your guests to avoid stepping onto the product, preventing slips and falls, keeping your safety in mind.
Can I leave my BOAT MATEĀ® in the water all boating season?
Absolutely! Attach it to the dock and simply remove it at the end of the season. A helpful tip to extend its life is to give it a wipe down when needed throughout the season.
How much do I inflate the Boat MateĀ®?
We recommend inflating your Boat MateĀ® between 1-2 psi. You will want to allow some room for expansion for when temperatures rise, (you should be able to depress the BOAT MATEĀ® approximately 1/2 inch with your thumb.) If you use the pump supplied, 100 manual pumps should inflate the Boat MateĀ® perfectly.
What size of boats can be used with the BOAT MATEĀ®?
The Boat MateĀ® will protect watercraft up to 24' long with a single bumper. For larger applications, use 2 BOAT MATESĀ® connected end to end with the stainless steel D rings.
How do I clean the bumper?
Lukewarm water and a mild detergent is all you need with a soft cloth.
What happens if I get a hole in my BOAT MATEĀ®?
Each BOAT MATEĀ® comes with a repair patch if it happens to accidentally tear.
Is the BOAT MATEĀ® safe to step on?
BOAT MATEĀ® is not intended to use as a step and we've indicated that by putting a "No Step" symbol on each end for everyone's safety.
Can BOAT MATEĀ® be used in salt water?
Yes, however we recommend cleaning monthly to protect it from any harsh elements.
Does the BOAT MATEĀ® have a cover?
No, we have found that a cover or āsockā actually accumulates dirt and debris and can end up scratching your boat.
Is there a specific way to moor or tie up the BOAT MATEĀ®?
For best results, and to prevent stress on the D-Ring patches, the Boat MateĀ® ropes must be perpendicular to the boat mate and dock. Do not attach any ropes at less than a 90 degree angle. (Anything less will put an unnecessary strain on the D-Ring connection and possible cause detachment).