Radar Ski
Part number: RD6SENPB-65
2026 Radar Senate Pro Build Slalom Waterski Blank
Regular Priced From - $2,799.99
Description
2026 Radar Senate Pro Build Slalom Waterski Blank
Please Note: On May 23/25, Radar’s Canadian distributor implemented a significant price increase to our cost of this ski. We have chosen not to increase the price, however, this has forced us to eliminate any discounts on this ski. No Charge Outbound Shipping, as well as no charge professional setup, still applies.
The Senate has been said to change lives, waterski lives that is. Proudly, it is the most widely-heralded, highly regarded shape in our line, simply because it works so well across a wide spectrum of skiers. We start with our new Vapor shape and mindfully add two tenths of an inch in extra width between the tunnel and the edge bevel. As opposed to simply scaling the ski wider, this keeps the active wet surface the same as the Vapor, meaning it's going to turn and grip like a Vapor does. Lightning fast where it needs to be and controlled through the turn, we have found the ideal surface area and shape for flat out performance at slightly slower speeds. From the seasoned veteran looking to get back to their prime, to the 34 MPH competitor looking to conquer new line lengths, the Senate Series has a model that will have you rethinking the limits of your personal waterski goals.
Where we add surface area to the Senate series is the backbone to bridging ease of use, with flat-out performance. As opposed to simply scaling a Vapor wider we start with its active wet surface (the tunnel and edge bevels) and leave them relatively intact. From there we build surface area by adding a one tenth of an inch rail between the outer edge of the concave and the bevel. This small rail creates lift and support at slower speeds without sacrificing the ski’s roll, grip and drive through the wakes. This allows you to slow the boat, without slowing your ability to attack the water.
We take the Vapor Pro Build sauce and wrap it in our best-selling shape; the Senate Pro Build is the ultimate 28 - 34 MPH tournament machine. Not dumbed down, but amped up to support you through the turns at slightly slower speeds. The Pro Build sits higher in the water to ensure you carry your speed through the entire turn, even as you slow the boat down. Say so long to heavy hits from the boat, and hello to on-water efficiency from one end of the course to the other.
- PMI Core - Lightweight, high density, most response.
- Textreme Carbon - Lighter, stronger composites.
- Carbon Rods - Zonal flex for the optimum layup.
- Bio Resin - Plant based and better.
- Radar Lab Made - Thanks Herb.
Terrain - Course
Recommended Speed Range - 28-34 MPH / 46-55 KPH
Sizes - 65”, 67”, 69”
Recommended Weight Range -
65” - Up to 170 lbs / Up to 77 kg
67” - 160 - 200 lbs / 73 - 91 kg
69” - 180 - 220 lbs / 82 - 100 kg
Surface Area -
65” - 350.57 SQ”
67” - 378.85 SQ”
69” - 401.81 SQ”
Max Width -
65” - 6.94”
67” - 7.16”
69” - 7.37”
No charge professional fin tuning and binding set up included and backed by our Performance Guarantee - Need help sizing your ski? Give us a call or drop us an email 1-866-955-0917 or info@shuswapsnb.com
Please Note: On May 23/25, Radar’s Canadian distributor implemented a significant price increase to our cost of this ski. We have chosen not to increase the price, however, this has forced us to eliminate any discounts on this ski. No Charge Outbound Shipping, as well as no charge professional setup, still applies.
The Senate has been said to change lives, waterski lives that is. Proudly, it is the most widely-heralded, highly regarded shape in our line, simply because it works so well across a wide spectrum of skiers. We start with our new Vapor shape and mindfully add two tenths of an inch in extra width between the tunnel and the edge bevel. As opposed to simply scaling the ski wider, this keeps the active wet surface the same as the Vapor, meaning it's going to turn and grip like a Vapor does. Lightning fast where it needs to be and controlled through the turn, we have found the ideal surface area and shape for flat out performance at slightly slower speeds. From the seasoned veteran looking to get back to their prime, to the 34 MPH competitor looking to conquer new line lengths, the Senate Series has a model that will have you rethinking the limits of your personal waterski goals.
Where we add surface area to the Senate series is the backbone to bridging ease of use, with flat-out performance. As opposed to simply scaling a Vapor wider we start with its active wet surface (the tunnel and edge bevels) and leave them relatively intact. From there we build surface area by adding a one tenth of an inch rail between the outer edge of the concave and the bevel. This small rail creates lift and support at slower speeds without sacrificing the ski’s roll, grip and drive through the wakes. This allows you to slow the boat, without slowing your ability to attack the water.
We take the Vapor Pro Build sauce and wrap it in our best-selling shape; the Senate Pro Build is the ultimate 28 - 34 MPH tournament machine. Not dumbed down, but amped up to support you through the turns at slightly slower speeds. The Pro Build sits higher in the water to ensure you carry your speed through the entire turn, even as you slow the boat down. Say so long to heavy hits from the boat, and hello to on-water efficiency from one end of the course to the other.
- PMI Core - Lightweight, high density, most response.
- Textreme Carbon - Lighter, stronger composites.
- Carbon Rods - Zonal flex for the optimum layup.
- Bio Resin - Plant based and better.
- Radar Lab Made - Thanks Herb.
Terrain - Course
Recommended Speed Range - 28-34 MPH / 46-55 KPH
Sizes - 65”, 67”, 69”
Recommended Weight Range -
65” - Up to 170 lbs / Up to 77 kg
67” - 160 - 200 lbs / 73 - 91 kg
69” - 180 - 220 lbs / 82 - 100 kg
Surface Area -
65” - 350.57 SQ”
67” - 378.85 SQ”
69” - 401.81 SQ”
Max Width -
65” - 6.94”
67” - 7.16”
69” - 7.37”
No charge professional fin tuning and binding set up included and backed by our Performance Guarantee - Need help sizing your ski? Give us a call or drop us an email 1-866-955-0917 or info@shuswapsnb.com