Radar Ski
Part number: WSPKG13
2026 Radar Senate Pro Build w/ Vector BOA Front & RTP
Regular Priced From - $3,419.99
Description
2026 Radar Senate Pro Build w/ Vector BOA Front & RTP
COMMENT SKI AND BINDING SIZE NEEDED AT CHECKOUT
2026 Radar Senate Pro Build Slalom Waterski Blank
The Senate has been said to change lives, waterski lives that is. Proudly, it is the most widely-heralded, highly regarded shape in our line, simply because it works so well across a wide spectrum of skiers. We start with our new Vapor shape and mindfully add two tenths of an inch in extra width between the tunnel and the edge bevel. As opposed to simply scaling the ski wider, this keeps the active wet surface the same as the Vapor, meaning it's going to turn and grip like a Vapor does. Lightning fast where it needs to be and controlled through the turn, we have found the ideal surface area and shape for flat out performance at slightly slower speeds. From the seasoned veteran looking to get back to their prime, to the 34 MPH competitor looking to conquer new line lengths, the Senate Series has a model that will have you rethinking the limits of your personal waterski goals.
Where we add surface area to the Senate series is the backbone to bridging ease of use, with flat-out performance. As opposed to simply scaling a Vapor wider we start with its active wet surface (the tunnel and edge bevels) and leave them relatively intact. From there we build surface area by adding a one tenth of an inch rail between the outer edge of the concave and the bevel. This small rail creates lift and support at slower speeds without sacrificing the ski’s roll, grip and drive through the wakes. This allows you to slow the boat, without slowing your ability to attack the water.
We take the Vapor Pro Build sauce and wrap it in our best-selling shape; the Senate Pro Build is the ultimate 28 - 34 MPH tournament machine. Not dumbed down, but amped up to support you through the turns at slightly slower speeds. The Pro Build sits higher in the water to ensure you carry your speed through the entire turn, even as you slow the boat down. Say so long to heavy hits from the boat, and hello to on-water efficiency from one end of the course to the other.
-PMI Core - Lightweight, high density, most response.
-Textreme Carbon - Lighter, stronger composites.
-Carbon Rods - Zonal flex for the optimum layup.
-Bio Resin - Plant based and better.
-Radar Lab Made - Thanks Herb.
Terrain - Course
Recommended Speed Range - 28-34 MPH / 46-55 KPH
Recommended Weight Range -
65” - Up to 170 lbs / Up to 77 kg
67” - 160 - 200 lbs / 73 - 91 kg
69” - 180 - 220 lbs / 82 - 100 kg
Surface Area -
65” - 350.57 SQ”
67” - 378.85 SQ”
69” - 401.81 SQ”
Max Width -
65” - 6.94”
67” - 7.16”
69” - 7.37”
Radar Vector BOA Carbitex Slalom Ski Binding Al Plate -Front
This boot rewrites the rules for open toe footwear. By wrapping our Feather Frame 2.0 Chassis entirely in Carbitex OmniFlex we have created an open toe boot with more performance and connection to the ski than we ever thought possible. The immediate reaction is instantly felt and results in tighter turns smoother cuts, slip your foot into the future.
Radar boot design has always been focused on improving your on-water experience through innovation and cutting-edge comfort. By utilizing a hybrid structure, we build a boot that truly wraps around your foot creating an ultimate connection to the ski. This connection results in a lossless power transfer and allows you to feel immediate engagement on the water. Whether you’re riding the premium Vapor boot, the legendary Vector or our entry level Prime, you’ll feel the difference that comes with riding a Radar boot.
BOA® Fit System - The BOA® integration into the boots offers an instant response found only in the Radar line. Transform your experience through a fast, customizable, and comfortable fit.
Carbitex OmniFlex - Carbitex is a carbon fiber textile material that is more reactive than any other material on the market. This reactivity translates into an unparalleled connection to the ski.
Wrap Tech Level 4 - Wrap Tech fuses the external skeleton of the boot to the base textile layer which gives the boot the ability to conform to the shape of your foot, in turn giving you more response.
Molded 3D Tongue
Symmetrical Fit
Small (5-8)
Standard (7-11)
XL (10-14)
View Radar's Slalom Boot Specifications
Radar Adjustable RTP Aluminum Plate - BOA
With Carbitex performance, and our exclusive BOA fit and function, this rear toe plate redefines the slalom kicker game.
BOA® Fit System
Carbitex Omniflex
Independent Floating Tongue
Contoured Footbed
Feather Frame 2.0 Chassis or Aluminum Plate
Carbitex
Carbitex is a carbon fiber textile material that is more reactive than any other material on the market. This reactivity translates into an unparalleled connection to the ski.
BOA®
The BOA® integration into the boots offers an instant response found only in the Radar line. Transform your experience through a fast, customizable, and comfortable fit.
One Size Fits Most
No charge professional fin tuning and binding set up included and backed by our Performance Guarantee - Need help sizing your ski? Give us a call or drop us an email 1-866-955-0917 or info@shuswapsnb.com
COMMENT SKI AND BINDING SIZE NEEDED AT CHECKOUT
2026 Radar Senate Pro Build Slalom Waterski Blank
The Senate has been said to change lives, waterski lives that is. Proudly, it is the most widely-heralded, highly regarded shape in our line, simply because it works so well across a wide spectrum of skiers. We start with our new Vapor shape and mindfully add two tenths of an inch in extra width between the tunnel and the edge bevel. As opposed to simply scaling the ski wider, this keeps the active wet surface the same as the Vapor, meaning it's going to turn and grip like a Vapor does. Lightning fast where it needs to be and controlled through the turn, we have found the ideal surface area and shape for flat out performance at slightly slower speeds. From the seasoned veteran looking to get back to their prime, to the 34 MPH competitor looking to conquer new line lengths, the Senate Series has a model that will have you rethinking the limits of your personal waterski goals.
Where we add surface area to the Senate series is the backbone to bridging ease of use, with flat-out performance. As opposed to simply scaling a Vapor wider we start with its active wet surface (the tunnel and edge bevels) and leave them relatively intact. From there we build surface area by adding a one tenth of an inch rail between the outer edge of the concave and the bevel. This small rail creates lift and support at slower speeds without sacrificing the ski’s roll, grip and drive through the wakes. This allows you to slow the boat, without slowing your ability to attack the water.
We take the Vapor Pro Build sauce and wrap it in our best-selling shape; the Senate Pro Build is the ultimate 28 - 34 MPH tournament machine. Not dumbed down, but amped up to support you through the turns at slightly slower speeds. The Pro Build sits higher in the water to ensure you carry your speed through the entire turn, even as you slow the boat down. Say so long to heavy hits from the boat, and hello to on-water efficiency from one end of the course to the other.
-PMI Core - Lightweight, high density, most response.
-Textreme Carbon - Lighter, stronger composites.
-Carbon Rods - Zonal flex for the optimum layup.
-Bio Resin - Plant based and better.
-Radar Lab Made - Thanks Herb.
Terrain - Course
Recommended Speed Range - 28-34 MPH / 46-55 KPH
Recommended Weight Range -
65” - Up to 170 lbs / Up to 77 kg
67” - 160 - 200 lbs / 73 - 91 kg
69” - 180 - 220 lbs / 82 - 100 kg
Surface Area -
65” - 350.57 SQ”
67” - 378.85 SQ”
69” - 401.81 SQ”
Max Width -
65” - 6.94”
67” - 7.16”
69” - 7.37”
Radar Vector BOA Carbitex Slalom Ski Binding Al Plate -Front
This boot rewrites the rules for open toe footwear. By wrapping our Feather Frame 2.0 Chassis entirely in Carbitex OmniFlex we have created an open toe boot with more performance and connection to the ski than we ever thought possible. The immediate reaction is instantly felt and results in tighter turns smoother cuts, slip your foot into the future.
Radar boot design has always been focused on improving your on-water experience through innovation and cutting-edge comfort. By utilizing a hybrid structure, we build a boot that truly wraps around your foot creating an ultimate connection to the ski. This connection results in a lossless power transfer and allows you to feel immediate engagement on the water. Whether you’re riding the premium Vapor boot, the legendary Vector or our entry level Prime, you’ll feel the difference that comes with riding a Radar boot.
BOA® Fit System - The BOA® integration into the boots offers an instant response found only in the Radar line. Transform your experience through a fast, customizable, and comfortable fit.
Carbitex OmniFlex - Carbitex is a carbon fiber textile material that is more reactive than any other material on the market. This reactivity translates into an unparalleled connection to the ski.
Wrap Tech Level 4 - Wrap Tech fuses the external skeleton of the boot to the base textile layer which gives the boot the ability to conform to the shape of your foot, in turn giving you more response.
Molded 3D Tongue
Symmetrical Fit
Small (5-8)
Standard (7-11)
XL (10-14)
View Radar's Slalom Boot Specifications
Radar Adjustable RTP Aluminum Plate - BOA
With Carbitex performance, and our exclusive BOA fit and function, this rear toe plate redefines the slalom kicker game.
BOA® Fit System
Carbitex Omniflex
Independent Floating Tongue
Contoured Footbed
Feather Frame 2.0 Chassis or Aluminum Plate
Carbitex
Carbitex is a carbon fiber textile material that is more reactive than any other material on the market. This reactivity translates into an unparalleled connection to the ski.
BOA®
The BOA® integration into the boots offers an instant response found only in the Radar line. Transform your experience through a fast, customizable, and comfortable fit.
One Size Fits Most
No charge professional fin tuning and binding set up included and backed by our Performance Guarantee - Need help sizing your ski? Give us a call or drop us an email 1-866-955-0917 or info@shuswapsnb.com